오드 로이드 고 - odeu loideu go

  • 설명

ODROID-GO Advance Black Edition Aura Black

ODROID-GO Advance Black Edition Clear White

PACKAGE INCLUDE

오드 로이드 고 - odeu loideu go

A USB Type-A Power Cable J D-PAD rubber
B Top enclosure K A, B, X, Y button rubber
C Bottom enclosure L battery sticker
D Plastic L/R trigger, X, Y, power Buttons M Analog joystick
E Plastic D-pad, A, B Buttons N 320×480 TFT LCD
F ODROID-GO-Advance board O 0.5W speaker
G 3000mAh battery P 1.7×5 screws (7 pcs)
H LCD window Q 1.7×8 screws (4 pcs)
I I ~ VI button rubber R Driver

* 8GB or higher capacity MicroSD card is additionally required. 

You can download the OS image and then, you will write the image to your SD card. There are some ways to write the OS image. For beginners, we recommend the use of an Etcher tool.

Installing OS image on your SD card

ASSEMBLY GUIDE

https://wiki.odroid.com/odroid_go_advance/go_adv_assembling

  • Force Power OFF

If you have any problem with your ODROID-GO-Advance, you will try to switch off.
You can switch off ODROID-GO-Advance by pushing the on/off buttons for about 6 seconds.

DISSASSEMBLY GUIDE

THE EMULATOR SUPPORTS

atari2600
atari5200
atari7800
atarilynx
gamegear
gb
gba
gbc
mastersystem
megadrive
nes
pcengine
pcenginecd
psx
segacd
snes
psp

And more

  • Some game ROMs cannot run at full speed.

SPECIFICATIONS

Processor CPU : RockChip RK3326(Quad-Core ARM Cortex-A35 1.3GHz)
GPU : Mali-G31 Dvalin
Memory 1GB (DDR3L 786Mhz, 32 Bits bus width)
Storage SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface)
Display 3.5inch 320×480 TFT LCD (ILI9488, MIPI interface)
Audio Earphone Jack, 0.5Watt 8Ω Mono
Battery Li-Polymer 3.7V/3000mAh, Up to 10 hours of continuous game playing time
DC Jack 5V input, 2.5mm diameter DC plug: A USB charging cable is included in the package.
External I/O USB 2.0 Host x 1, 10Pin port(I2C, GPIO, IRQ at 3.3Volt)
Input Buttons F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Analog joystick
Power consumption Game emulation mode: 250 ~ 500mA (depends on backlit brightness and type of game emulations), Power off mode: <1mA

DIAGRAM

오드 로이드 고 - odeu loideu go

BOARD DETAIL

오드 로이드 고 - odeu loideu go

A PMIC(rk817) including a charger and audio features.
B D-pad buttons
C I ~ VI buttons
D X, Y, A, B buttons

오드 로이드 고 - odeu loideu go

A CPU : RockChip RK3326(Quad-Core ARM Cortex-A35 1.3GHz)
GPU : Mali-G31 Dvalin
J Statue LED(charger, alive, power)
B 1GB (DDR3L 786Mhz, 32 Bits bus width) K DC Power Jack
C SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface) L 10pin expansion port
D MicroSD card slot M Audio jack
E Forced SD card boot(without spirom) N 20pin LCD connector
F UART port(But not mounted default) O PWR switch
G Speaker connector P Analog joystick connector
H Battery connector Q Left trigger button
I USB 2.0 type-A Host R Right trigger button

Compatible Products